Patio Door Installation Cost - Written Price Before Anything Is Ordered

Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as $199/month*on approved credit; ask for current terms

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Patio Door Installation Cost in West Palm Beach?

Patio door installation in West Palm Beach typically costs $1,800 to $7,500, with most homeowners landing somewhere between $2,500 and $4,800 depending on door type, glass specification, and whether the opening needs structural modification. Impact-rated sliding glass doors - the standard choice in Palm Beach County given local hurricane code requirements - run $2,200 to $6,000 installed. If you’re replacing an existing door in a standard-sized opening, the job usually wraps in a single day.

For a full picture of what goes into the project - materials, labor, permits, and the factors that push prices toward the high end in West Palm Beach - the breakdown below covers everything you’d want to know before calling a contractor.

Patio Door Installation Cost Breakdown (2026)

The table below reflects pricing Rowan Construction Group sees in the West Palm Beach market as of 2026. These are installed costs - materials plus labor plus standard debris removal. Permit fees are listed separately because they vary by municipality (more on that below).

The single biggest cost variable in West Palm Beach isn’t the door itself - it’s whether your opening needs structural work. A standard 6-foot sliding door dropped into an existing, correctly-sized rough opening is straightforward. A new or widened opening in a CBS (concrete block and stucco) home, which describes the majority of houses built in West Palm Beach between the 1950s and 1990s, means cutting through block, building a proper header, and patching both interior drywall and exterior stucco. That adds $900 to $3,400 to the project total depending on how much block comes out.

Glass specification is the other major lever. A basic impact sliding door from a mid-tier line can start around $900 for the unit. A low-E, argon-filled, PGT WinGuard or Andersen 200 Series impact door in the same opening might cost $1,800 to $3,200 just for the unit before installation. The energy savings in South Florida’s cooling climate are real - but the price difference is also real, and both ends of the range do satisfy Florida Building Code Section 1609 if they carry the correct impact rating.

What Affects Patio Door Installation Pricing in West Palm Beach

• Impact glass requirement: Palm Beach County falls within the Florida Building Code’s High-Velocity Hurricane Zone (HVHZ) designation for coastal properties, and most of West Palm Beach’s inland neighborhoods are also subject to impact or shutter requirements under the 2023 Florida Building Code, 7th Edition. Any permitted door installation here must meet or exceed the design pressure ratings in the code - typically DP-50 or higher. Non-impact doors can still be installed in certain scenarios if an approved shutter system is already in place, but budget for the impact unit as a baseline when planning.
• Door width and panel configuration: A standard 6-foot (72-inch) two-panel slider is the most affordable configuration. Stepping up to an 8-foot, 9-foot, or 12-foot opening - common in newer Ibis Golf and Country Club homes and the newer construction around Palm Beach Gardens just north of West Palm Beach - increases both the door unit cost and the structural work required. Each additional panel on a multi-slide system adds roughly $400 to $800 in material cost.
• Frame material: Vinyl frames are the most common choice in West Palm Beach and the most budget-friendly, but they can discolor under sustained UV exposure in South Florida’s climate without a quality paint coat or pigmentation. Aluminum frames with a thermal break handle the heat and salt air better and are standard on most PGT and CGI impact lines. Fiberglass costs more upfront but holds its shape through repeated exposure to humidity - worth considering for doors that face west or get direct afternoon sun.
• Existing opening condition: Homes in historic districts like Grandview Heights, Flamingo Park, and the South End often have original wood framing that has absorbed decades of South Florida humidity. When we pull the old door, it’s not unusual to find rotted sill plates or compromised framing that needs to be sistered or replaced before the new unit goes in. Rowan’s documented photo record catches this before it becomes a dispute - you see exactly what was found and what was done.
• Permit requirements and inspection scheduling: The City of West Palm Beach’s Building Department requires a permit for most door replacements where the door type, size, or impact rating changes. Unincorporated Palm Beach County has its own permit office. Either way, permit turnaround in this market runs 5 to 15 business days for over-the-counter approvals and up to 30 days for electronic plan review if structural drawings are required. That timeline affects how quickly the project finishes, not just what it costs.
• Finishing and patching work: CBS construction is the norm in West Palm Beach, which means the area around the new frame almost always needs stucco patching outside and drywall work inside. On a standard replacement, this is minor - $200 to $400. On a new or widened opening, it’s a real line item. Some contractors leave this to the homeowner; Rowan includes a written scope that specifies exactly what finishing is and isn’t included before anyone picks up a tool.

Before

After

Patio Door Types: Which One Makes Sense in West Palm Beach?

This city has a specific set of conditions that narrow the practical choices pretty quickly: salt air if you’re near the Intracoastal, intense UV on western and southern exposures, hurricane requirements that are more demanding than most of the country, and an existing housing stock that skews heavily toward CBS construction rather than wood-frame.

Sliding Glass Doors

The most common patio door in West Palm Beach by a wide margin. Two-panel impact sliders from PGT WinGuard, CGI Impact Resistant Windows and Doors, or Simonton StormBreaker Plus cover most applications and most budgets. They work well in the standard 6-foot openings found in post-war CBS homes throughout neighborhoods like Grandview, Northwood, and the South End. The track seal quality matters here - a door that doesn’t seal tightly drives up cooling costs fast when outdoor temperatures are in the high 80s for six months.

French Patio Doors

Hinged rather than sliding, French doors open outward or inward and work particularly well in the older bungalows and Mediterranean revivals in El Cid, Flamingo Park, and the historic districts near downtown. They look right on those houses in a way that a sliding aluminum frame doesn’t. The tradeoff is that they require clear floor space for the swing path, and outswing doors in Florida’s wind zone need specific hardware to meet code. Installed cost typically runs $3,000 to $6,500 for an impact-rated pair.

Multi-Slide and Bi-Fold Doors

These are the doors that effectively open an entire wall and are popular in high-end renovation projects in Palm Beach Island-adjacent properties and newer builds in the Ibis and Breakers West communities. They run $5,500 to $12,000 or more installed and almost always require a structural engineer’s stamp if you’re widening the opening. Beautiful when done correctly. Expensive when done incorrectly - and the difference usually comes down to how carefully the structural header was sized and installed.

Pocket Doors

A pocket sliding door disappears into the wall cavity rather than stacking on a track beside the opening. The appeal is obvious: zero visual intrusion, clean sightlines. The cost reflects the complexity. You’re essentially doing a partial wall renovation alongside a door installation. Budget $4,500 to $9,000 and expect the framing work to dominate the timeline.

New Installation vs. Door Replacement: What Changes About the Price

Replacing an existing patio door in a same-sized opening is the simpler, less expensive scenario. The rough opening is already there, the header is already sized, and the structural work is limited to pulling the old frame and setting the new one. Labor for this type of replacement typically runs $400 to $900 in the West Palm Beach market, with total installed costs in the $2,200 to $4,500 range for a standard impact slider.

Creating a new opening in a CBS home is a different animal. Cutting through concrete block requires a masonry blade, a correctly engineered header (usually a reinforced concrete lintel or steel beam), and patching work on both sides. The structural modification alone can add $1,200 to $2,500, and you’ll need a permit with structural drawings in most cases. The permit process at the City of West Palm Beach or Palm Beach County Building Division adds cost and a few weeks of lead time.

Under Clause 1 of the Haven Standard, Rowan delivers a written price and written scope before any work starts. For a new-opening project, that means the structural work, permit cost estimate, and finishing work are all itemized in the quote - not discovered after the fact.

How to Save on Patio Door Installation

There’s a useful distinction between saving money and cutting corners, and in West Palm Beach’s hurricane zone, the cost of cutting corners on a patio door tends to show up in storm damage claims, failed inspections, and re-installation costs. That said, there are real ways to control the project budget.

• Keep the existing opening size. If your current 6-foot slider is being replaced with another 6-foot slider, you avoid structural modification costs entirely. Resisting the urge to widen to an 8-foot opening saves $1,000 to $2,500 depending on the wall construction.
• Choose vinyl or aluminum-framed impact units over wood or clad. PGT WinGuard and Simonton StormBreaker Plus both deliver solid impact performance in the $900 to $1,800 unit price range for standard sizes. You don’t have to spend $3,000 on a door unit to meet Florida Building Code requirements.
• Schedule outside of peak construction season. West Palm Beach sees elevated contractor demand from October through March, when seasonal residents are in town and renovation projects stack up. Scheduling in the May-to-August window sometimes means better availability and tighter pricing, though summer installation means working around afternoon storms.
• Get the permit pulled correctly the first time. A failed inspection means a re-inspection fee and potential rework. Contractors who understand the Palm Beach County Building Division’s review requirements - specifically the product approval documentation format for impact-rated units - move through the process faster and don’t pass re-inspection costs back to you.
• Bring a competing written estimate to Rowan for a free second opinion. Rowan offers a no-charge line-by-line review of any written estimate from a competitor. If the scope or pricing doesn’t hold up to scrutiny, you’ll know before you sign anything. Call (561) 475-3903 to schedule it.
• Address rot and framing issues before they become emergencies. In West Palm Beach’s humidity, a compromised sill plate discovered during installation is cheaper to fix at that point than after a storm drives water through the gap. Rowan’s documented photo record on every visit means you’re not taking our word for what was found - you see it.

For a written quote specific to your home’s opening size, wall construction, and door type, call Rowan Construction Group at (561) 475-3903. The estimate is free, the price is written before anyone starts, and there’s no pressure to sign.

Permits and Code Requirements in West Palm Beach

Florida Building Code Section 1609 and the accompanying product approval requirements mean that patio door installations in West Palm Beach aren’t permit-optional for most homeowners. Here’s what applies in practice:

• A permit is required when changing the door type, size, or impact-rating status of an existing opening, or when creating a new opening. Like-for-like replacements in certain scenarios may qualify for a simpler process, but the building department makes that call, not the contractor.
• Impact-rated doors must carry a Florida Product Approval number (FL#) that matches the design pressure requirements for your specific location. Palm Beach County’s wind speed maps put most of West Palm Beach at 165 mph design wind speed or higher.
• Permit fees through the City of West Palm Beach range from approximately $150 to $400 for standard door permits. Unincorporated Palm Beach County fees are in a similar range. Structural plan review adds cost and time.
• A final inspection is required before the job is considered code-compliant. A contractor who closes out a permitted job without a passing inspection leaves the homeowner with an open permit - which surfaces as a defect in title searches when the house is eventually sold.

West Palm Beach homeowners asking about Patio Door Installation in West Palm Beach can find a full overview of the process, timeline, and material options on that page. The pricing guide here focuses on cost; the service page covers the full project scope.

How Rowan Construction Group Quotes Patio Door Projects

Grant Rowan built Rowan Construction Group on a single operating principle: write the number down before anyone picks up a tool. That discipline, documented in the Haven Standard, has kept projects within a few percent of the agreed price across 4,000-plus jobs since 2007. Patio door installation follows the same process as every other trade Rowan handles.

Here’s what the quoting process looks like in practice:

1. A background-checked, uniformed Rowan technician visits the site and assesses the existing opening: rough opening dimensions, wall construction (CBS, wood frame, or hybrid), lintel or header condition, and any visible signs of moisture intrusion or framing compromise.
2. A documented photo record is taken of the existing conditions. You receive copies as a standard deliverable – not something you have to ask for.
3. A flat written price is produced that itemizes the door unit, labor, permit cost estimate, and any structural or finishing work the assessment identified. Under Clause 1 of the Haven Standard, that price is written before any work starts – always.
4. If scope changes after work begins – say, rotted framing is found once the old door comes out – no work on that change proceeds until a signed change order exists. That’s the administrative discipline that keeps final invoices close to the number the customer agreed to.

Rowan’s home page outlines all seven trades and the Haven Standard framework that governs every project, from kitchen remodels through door and window installations.

Patio Door Installation vs. Window Replacement: Overlapping Costs in West Palm Beach

Homeowners replacing patio doors in West Palm Beach often do it alongside window replacement – partly for cohesion and partly because the permit and mobilization costs are more efficient when both are done in the same project. For reference, impact window installation in West Palm Beach runs $8,000 to $25,000 for a whole-house project. A single large impact window in the $400 to $900 unit range, installed as part of a door project, can sometimes be added with minimal incremental labor cost.

If you’re evaluating a combined windows-and-doors project, ask for a single written scope that covers both. The permit process is simpler to manage as one application, and the stucco patching around multiple new frames is more efficiently priced as a package than as separate line items.

FAQs – Patio Door Installation Cost in West Palm Beach

How much does it cost to install a patio door in West Palm Beach?

Patio door installation in West Palm Beach costs $1,800 to $7,500 for most projects, with the majority of standard sliding glass door replacements coming in between $2,200 and $5,500 installed. That range includes the impact-rated door unit, labor, and standard finishing work. Structural modifications to widen or create a new opening add $600 to $2,500 on top of that. Call (561) 475-3903 for a written quote on your specific opening – the estimate is free and the price is flat before any work begins.

Do I need a permit to replace a patio door in West Palm Beach?

In most cases, yes. The City of West Palm Beach and Palm Beach County Building Division require a permit when you’re changing the door’s type, size, or impact rating. Permit fees run $150 to $550 depending on the scope. A permitted installation also means a final inspection – which closes out the permit and protects you when you sell the home. Rowan handles the permit application as part of the project scope, not as a separate arrangement you manage yourself.

Are impact-rated patio doors required in West Palm Beach?

For most new and replacement permitted installations in West Palm Beach, yes. The Florida Building Code places Palm Beach County at design wind speeds that require either impact-rated glazing or an approved protection system (like accordion shutters) on all openings, including patio doors. Impact-rated sliding doors start around $900 for the unit in standard sizes and satisfy that requirement when they carry the correct Florida Product Approval number. A non-impact door installed without a shutter system won’t pass inspection and won’t qualify for homeowner’s insurance discounts available under Florida’s wind mitigation program.

How long does patio door installation take in West Palm Beach?

A standard sliding door replacement in an existing same-size opening takes one day – typically four to six hours for installation and finishing. A new or widened opening in CBS construction takes two to three days when framing, lintel work, and stucco patching are included. Permit approval from the City of West Palm Beach or Palm Beach County adds five to thirty days of lead time before installation begins, depending on whether plan review is required. Rowan gives you a written timeline alongside the written price so you know what to expect before the crew arrives.

Is it cheaper to repair or replace a patio door in West Palm Beach?

Repair is cheaper when the problem is isolated: a damaged roller, a failed lock mechanism, or a broken seal in a single pane. Roller replacement runs $150 to $350; a new lock set runs $100 to $250. Replacement makes more sense when the frame is corroding (aluminum frames in salt-air environments near the Intracoastal start pitting at the weep holes after 15 to 20 years), the glass is single-pane and non-impact, or the door no longer seals correctly and is driving up your cooling bill. If the door is more than 20 years old and non-impact-rated, replacement usually pays for itself in insurance premium reduction and energy savings within a few years in West Palm Beach’s climate. Call (561) 475-3903 and describe what you’re seeing – we’ll tell you honestly whether it’s a repair or a replacement situation before we write any price.

What patio door brands does Rowan install in West Palm Beach?

Rowan sources across more than fifty vetted brands and selects the specification that fits the written scope. For impact patio doors in West Palm Beach, PGT WinGuard and CGI are the two most common Florida-manufactured lines – both carry the Florida Product Approval numbers required by the building department and are widely available through local distributors, which matters for lead time. Andersen, Simonton, and Pella’s impact lines are also options at different price points. The brand goes into the written quote alongside the unit specification and product approval number so you know exactly what you’re getting before anyone orders anything.

Key Takeaways

• Patio door installation in West Palm Beach runs $1,800 to $7,500 installed, with most standard impact slider replacements falling between $2,200 and $5,500.
• Impact-rated glazing is required for permitted installations in most West Palm Beach ZIP codes under the Florida Building Code – budget for it from the start.
• CBS construction (the norm in West Palm Beach) adds stucco patching and potentially structural work to any new or widened opening.
• Permits cost $150 to $550 and are required for most installations; plan for five to thirty days of lead time for approval.
• Structural modification of an existing opening adds $600 to $2,500 to the project total.
• Rowan provides a flat written price before any work starts, a documented photo record on every visit, and a 365-Day Done Right Promise on every project.
• A free second opinion on any written estimate from a competitor is available – call (561) 475-3903.

Ready to get an exact number for your West Palm Beach home? Rowan Construction Group delivers a written price before any work starts – no “call for a quote” runaround, no estimates that balloon after the crew arrives. Call (561) 475-3903 to schedule a free on-site assessment. Grant Rowan and the Rowan team cover West Palm Beach and the surrounding Palm Beach County market, and a live person answers that number around the clock.

Written by Grant Rowan, Owner at Rowan Construction Group West Palm Beach, serving West Palm Beach, FL since 2007. Pricing reflects the West Palm Beach market as of 2026. Rowan Construction Group West Palm Beach offers free estimates – call (561) 475-3903.