Mr-Glass Construction Service Nationwide

Why West Palm Beach Homeowners Choose Mr-Glass Construction

We provide independent Mr Glass service in West Palm Beach, specializing in impact window and door repair, replacement, and installation across the brand’s vinyl, aluminum, and wood-clad systems. Our crew has handled hundreds of Mr-Glass units in Palm Beach County, so we know how the 700 Series vinyl frames warp in sustained heat and how the 500 Series aluminum holds up - or doesn’t - three blocks from the Intracoastal. We are not affiliated with or authorized by Mr-Glass; we are an independent service provider who stocks OEM-grade and compatible aftermarket parts to keep your impact protection intact without the manufacturer markup. Call (561) 475-3903 to schedule your free estimate.

Call (561) 475-3903

Why Trust Rowan Construction Group West Palm Beach for Your Mr-Glass Construction?

Grant Rowan and our crew have been working Mr-Glass products in West Palm Beach long enough to know the difference between a seal failure and frame deflection without disassembling the unit. Grant grew up in Los Angeles watching his uncle frame houses in the San Fernando Valley, then trained at Los Angeles Trade-Technical College before putting in years on commercial and residential sites across Southern California. For the past several years, he and our team have applied that same discipline here in West Palm Beach - including projects along Flagler Drive - handling structural framing, concrete work, and Kitchen Remodeling services where Mr-Glass impact windows were specified for wind-load compliance where Mr-Glass impact windows were specified for wind-load compliance.

We carry OEM-grade weather seals, rollers, and hardware for Mr-Glass systems on our trucks, and when a part is backordered, we source aftermarket equivalents that meet or exceed Florida’s impact standards rather than leave your opening unprotected. Every technician is background-checked and uniformed; every visit includes a documented photo record of what we found and what we did. Under Clause 1 of the Haven Standard, you get a written price before any work starts - always, with no exceptions. We’ve kept projects within a few percent of that agreed number across 4,000-plus jobs since 2007 by requiring a signed change order before any additional work proceeds. That’s not a policy we advertise; it’s the administrative discipline that defines how we operate.

Our crew recently replaced a failed Mr-Glass 700 Series vinyl impact window in a West Palm Beach home after the homeowner noticed fogging between the panes and a draft during a storm. We removed the unit, discovered a compromised seal and slight frame warping from years of sun exposure, and installed a new impact window with fresh flashing and sealant. The homeowner now has a clear, secure window that meets current wind-load requirements.

Common Mr-Glass Construction Problems We Fix in West Palm Beach

• Failed weatherstripping on Mr-Glass impact sliding glass doors. The rubber and brush seals on the 1300 Series and impact sliding door systems degrade faster in West Palm Beach’s salt air and UV exposure than the manufacturer rates for inland use. Once the seal compresses or cracks, you get water intrusion during driving rain and a high-pitched whistle when the wind hits 40-plus mph - common during our summer thunderstorms. We replace with OEM-grade or improved-density aftermarket seals and verify the door’s drainage weep holes are clear, since blocked drains accelerate the next failure.
• Corrosion and pitting on 500 Series aluminum frames. The 500 Series aluminum impact windows use a mill-finish or anodized coating that holds up reasonably well inland, but within a mile of the Atlantic or the Intracoastal, salt aerosol penetrates micro-fissures in the finish. The result is cosmetic pitting that progresses to structural weakening at corner joints and mounting flanges. We assess whether the frame integrity still meets wind-load requirements; if not, replacement is the only code-compliant option. For early-stage corrosion, we can treat and reseal to extend service life.
• Seal failure in insulated glass units causing fogging. The dual-pane impact glass in Mr-Glass 700 Series vinyl units relies on a butyl primary seal and silicone secondary seal. In West Palm Beach’s heat-cycling - 90°F afternoons dropping to 75°F evenings ten months a year - the sealant fatigues faster than in temperate climates. Fogging between panes isn’t just cosmetic; it indicates the inert gas has escaped and the impact laminate may be delaminating. We test the unit’s structural integrity and replace when the laminate is compromised.
• Sagging or misaligned rollers and tracks on heavy impact sliding doors. A standard Mr-Glass impact sliding door can weigh 200-plus pounds. The tandem roller assemblies in older installations weren’t always spec’d for that load, especially where homeowners added aftermarket tint film that increased thermal expansion stress. The track dimples, the door drags, and eventually the frame torques out of square. We replace with heavy-duty stainless roller sets and realign the frame to within 1/8 inch - or recommend full replacement if the frame has permanently deformed.
• Frame warping in 700 Series vinyl units from sustained heat exposure. West Palm Beach roof overhangs are often minimal on modern stucco homes, and south-facing Mr-Glass vinyl windows can see surface temperatures exceeding 160°F. The vinyl softens, the frame bows slightly, and the sash no longer seats squarely. The gap may be invisible but measurable with a feeler gauge - and it’s enough to fail a wind-pressure test. We document the deflection, show you the measurement, and replace with a unit that has improved heat-stabilizer formulation or recommend aluminum-clad for that exposure.

Before

After

Mr-Glass Parts & Our Repair-vs-Replace Approach

We source OEM-grade replacement parts - weather seals, rollers, hardware, and glazing beads - directly from Mr-Glass suppliers when they’re available. When lead times stretch past two weeks, which happens on discontinued 500 Series hardware, we use high-quality aftermarket equivalents that carry Florida Product Approval for impact resistance and air infiltration. We don’t substitute without telling you; the part’s origin and rating are written into your quote.

Our repair-vs-replace decision is straightforward. If the impact glass is cracked, the laminate is delaminating, or the frame has lost structural integrity, we recommend full replacement. Florida Building Code doesn’t permit field repair of damaged impact-resistant glazing; the assembly must be tested and labeled as a unit. For seal failures, roller wear, or weatherstripping degradation in an otherwise sound frame, repair is usually cost-effective and code-compliant. We’ll show you the photos, explain the failure mode, and give you both options in writing. Call (561) 475-3903 for a free estimate - we’ll diagnose on-site and quote before any work starts.

Our Mr-Glass Service Process - Step by Step

1. 1
   Diagnosis with documentation. We inspect the Mr-Glass unit for frame condition, seal integrity, hardware function, and installation quality - including whether the original installer used proper shims, sealant, and flashing for West Palm Beach’s wind-borne debris region requirements. You get dated photos of every finding.
2. 2
   Written quote before any work starts. Under Clause 1 of the Haven Standard, we deliver a flat written price with line-item scope: parts, labor, permit fees if triggered, and warranty terms. No work proceeds until you approve in writing.
3. 3
   Repair or install with OEM or approved aftermarket parts. For replacements, we verify the new Mr-Glass unit’s Florida Product Approval number matches your exposure rating. For repairs, we use parts rated for coastal conditions.
4. 4
   Testing and code verification. We operate the unit through full cycles, check lock engagement, verify drainage path, and confirm the installation meets current Palm Beach County inspection standards - including secondary water barrier and clip/strap requirements if the project triggered a re-roof or structural permit.
5. 5
   Warranty documentation and photo record. You receive a written warranty, the completed photo record, and a summary of what was done. Our 365-Day Done Right Promise applies: if it’s not done right, we make it right.

Mr-Glass Products We Service & Install in West Palm Beach

We work on the full Mr-Glass residential impact line: the 1300 Series impact windows, the 700 Series vinyl impact windows, the 500 Series aluminum impact windows, and Mr-Glass impact sliding glass doors. We stock common wear parts for the 700 and 500 Series on our Mr-Glass Construction in Westgate, FL trucks - rollers, weather seals, and glazing beads - so most service calls don’t wait on shipping. For full replacements, we measure to 1/16 inch and verify rough-opening condition before ordering, since many original installations in 1990s-2000s West Palm Beach homes used non-standard framing that requires site adaptation.

We Also Service These Brands

Rowan Construction Group West Palm Beach is not a single-brand shop. We service and install KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, Kohler and Toto fixtures, GAF and Owens Corning roofing, and Belgard and Techo-Bloc pavers - fifty-plus vetted brands across seven trades. Our Mr-Glass depth is one specialty among many, backed by the same written-price discipline and documented process.

FAQs - Mr-Glass Construction Service in West Palm Beach

Book Your Mr-Glass Service in West Palm Beach, FL

Call (561) 475-3903 to schedule your free estimate. We’ll inspect your Mr-Glass units, document what we find, and deliver a written flat price before any work starts. That’s Clause 1 of the Haven Standard, and it’s been our practice since 2007. Measure twice, document everything, then get out of the way and let the work speak.

Written by Grant Rowan, Owner at Rowan Construction Group West Palm Beach, serving West Palm Beach since 2018.