Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterUnilock Construction in Riviera Beach, FL | Rowan Construction Group West Palm Beach
Unilock paver and wall system work in Riviera Beach runs $3,500-$18,000 depending on scope, with most driveway and patio projects quoted within 48 hours. What separates our Unilock service here is that we sequence every Singer Island job around Florida DEP Coastal Construction Control Line permitting, not just city approval, because we’ve seen too many crews start demolition and get shut down mid-start. Call (561) 475-3903 to schedule your free estimate with a written, line-item price before any work begins.
Why Riviera Beach Residents Choose Us for Unilock Service
We’ve been pulling permits in Riviera Beach since 2007, and the volume of Unilock driveways, pool decks, and retaining walls we’ve torn out and re-laid on Singer Island and the mainland is what makes us fluent in how these units actually behave in salt air. We’re not an authorized Unilock dealer - we’re an independent contractor who sources Unilock replacement units and sets them with the manufacturer’s specified joint sand and edge restraints so repairs blend rather than patch.
Grant Rowan, our owner, grew up in Los Angeles watching his uncle frame houses in the San Fernando Valley and trained at Los Angeles Trade-Technical College before putting in years on commercial and residential job sites across Southern California. For the past several years, he and our crews have handled everything from structural framing to full interior buildouts in West Palm Beach, including our Kitchen Remodeling in Riviera Beach and projects along Flagler Drive. He keeps a clean site, hands over a binder of documentation at close, and returns calls the same day. That discipline carries into how we bid Unilock work in Riviera Beach: measure twice, document everything, then get out of the way and let the work speak.
Every project gets a flat written price and written scope before work starts. No change proceeds without a signed change order. Every visit includes a documented photo record as standard, not an upgrade. Under our 365-Day Done Right Promise, if it’s not done right, we make it right - backed by The Haven Standard, not a handshake.
Common Unilock Construction Problems We Solve in Riviera Beach
- Salt-corroded joint sand leaving open paver joints. Salt-laden air off the Atlantic and the Intracoastal corrodes the polymeric sand binder in Unilock pavers far faster than inland, leaving gaps where wind-driven rain and root intrusion lift units. We re-sweep with manufacturer-specified joint sand formulated for marine exposure.
- Brussels Block cracked by post-tension slab repair. On Singer Island, Unilock Brussels Block installed over a slab that never accounted for post-tension cable locations gets cracked and displaced when slab repair crews core or saw near the driveway perimeter. We map cable runs before demolition and coordinate with structural repair crews.
- Settled subgrade causing rutting and rocking. The original 1960s-1990s condo driveways and walkways on Singer Island have settled subgrades and failed edge restraint; Unilock pavers over them rut because the base was never recompacted to current standards. We tear out to grade, recompact aggregate base in lifts, and install hot-dip galvanized or stainless-steel edge restraint.
- UV and salt-spray surface fading mistaken for staining. The integrally colored surface layer on Unilock pavers wears through on high-traffic pool deck runs exposed to year-round sun and salt spray. We assess whether cleaning, spot replacement, or full re-lay is the honest fix.
- Rusted edge restraint from dual water exposure. Virtually all of Riviera Beach sits in Florida’s Wind-Borne Debris Region with salt air from two directions; standard steel edge restraint corrodes in 3-5 years. We spec stainless-steel or hot-dip galvanized hardware as code-practical necessity, not upgrade.
BeforeAfterUnilock Service in Riviera Beach: What Local Conditions Mean for Your Equipment
Riviera Beach is unique in Palm Beach County for combining a true barrier island - Singer Island, with its dense corridor of high-rise condominiums - and the Port of Palm Beach on the mainland. That coastal-industrial duality means local contractors must navigate Florida DEP Coastal Construction Control Line permits for Singer Island work on top of standard municipal permits, a dual-permitting burden that simply doesn’t exist in neighboring West Palm Beach or Lake Park. We’ve seen crews accustomed to straightforward Palm Beach County permitting start a Unilock paver tear-out, get flagged mid-demolition, and stall for weeks while state-level drawings catch up - a risk we avoid with Riviera Beach Bathroom Remodeling and every project we manage. For Unilock owners on Singer Island, this means any driveway or patio re-lay has to be sequenced around CCCL approval, not just the city permit. We build that timeline into our written quote so you’re not paying for idle crew days.
Unilock Models & Products We Service in Riviera Beach
Our crews work with the full Unilock line commonly found in Riviera Beach:
- Brussels Block - tumbled, rustic segmental paver, extremely common on island driveways; we stock replacement units for color-matched repair.
- Beacon Hill - flagstone-look paver used on pool decks and patios; joint sand failure is the typical service call.
- Brussels Dimensional Stone - wall units for planters and seat walls; we re-set shifted runs and replace spalled units.
- Richcliff - large-format slab paver used on higher-end Singer Island entries; base settlement shows as corner rocking on these big units.
We source Unilock replacement units rather than mismatched generic pavers, and we set with Unilock’s own edge restraints and specified joint sand. When a driveway has more than about 15-20% failed units or an unstable base, honest repair-versus-replace math usually points to full tear-out and re-base.
For our full Unilock sales & service capabilities across all product lines, see our brand page.
Unilock Service Pricing in Riviera Beach
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000-$18,000 |
| Paver Patio Installation | $3,500-$11,000 |
| Driveway Replacement | $5,000-$14,000 |
| Driveway Sealing | $250-$700 |
What drives cost: square footage, base condition, access for excavation equipment, and whether DEP CCCL review is triggered. A free estimate includes measured site dimensions, base assessment, written scope, and flat price with no change order until you sign it. Call (561) 475-3903 for your written quote - estimates are free, and we offer a Free Second Opinion on any competitor’s written estimate.
Serving Riviera Beach, FL - Our Local Coverage Area
We’re based in the Riviera Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Unilock Construction in Riviera Beach
Yes. Routine driveway or patio permits on Singer Island routinely trigger a Florida DEP CCCL review requiring separate state-level drawings and weeks of lead time - a dual-permitting burden mainland Riviera Beach jobs do not carry. We sequence demolition and re-lay around CCCL approval so work doesn’t start and stop. Call (561) 475-3903 and we’ll check permit status for your specific property.
Salt-laden air from Atlantic and Intracoastal exposure corrodes joint sand binders and metal edge restraint in 3-5 years versus 8-12 years inland, and UV plus salt spray wears through integrally colored surfaces on pool deck runs. We spec marine-formulated joint sand and stainless-steel or hot-dip galvanized hardware as standard practice. Call (561) 475-3903 for a condition assessment.
We source Unilock replacement units rather than generic pavers, and we keep common Brussels Block colors in rotation for Riviera Beach repair work. Faded existing units may need cleaning or selective replacement to blend; we’ll show you the match before ordering. Call (561) 475-3903 for an exact quote - estimates are free.
Impact rating applies to windows, doors, and openings in Florida’s Wind-Borne Debris Region, not to paving. Unilock segmental pavers are permeable and flexible, which is why they perform well in hurricane water intrusion scenarios, but they are not “impact-rated” in the code sense. We document our base compaction and drainage specs for association review. Call (561) 475-3903 to discuss association requirements.
We map post-tension cable locations before any sawing or coring, coordinate with structural repair crews if slab work is needed, and design the paver base to accommodate future slab access without full tear-out. The DEP CCCL review may also apply depending on slab proximity to the coastal control line. Call (561) 475-3903 for a site-specific plan and written price.
Service Areas Near Riviera Beach
We provide Riviera Beach service area coverage across the mainland and Singer Island, with crews also working Unilock service in West Palm Beach, Unilock service in Westgate, Lake Park, North Palm Beach, and Royal Palm Beach. Each area gets the same written-price-first discipline and documented photo record on every visit.
Book Your Unilock Service in Riviera Beach Today
Call (561) 475-3903 to schedule your free estimate. We’ll deliver a written, line-item price before any work starts, sequence around any required DEP CCCL review, and back the job with our 365-Day Done Right Promise. Every crew is background-checked and uniformed; a live person answers calls 24/7.
Written by Grant Rowan, Owner at Rowan Construction Group West Palm Beach, serving Riviera Beach since 2007.