Cambria Driveway & Pavers Nationwide

Cambria Driveway & Pavers: The West Palm Beach Owner’s Guide

Cambria driveway and paver systems in West Palm Beach typically run $7,000-$18,000 installed for paver driveways and $3,500-$11,000 for paver patios, with most Cambria-compatible replacement sections and edge restraints available same-day from our local inventory. We stock the full range of Cambria paver edge profiles, permeable joint spacers, and color-matched polymeric sand that the West Palm Beach climate demands. Most homeowners first notice trouble when the sand between pavers washes out after heavy rain, or when a section along the driveway settles unevenly, creating a trip hazard that wasn’t there last season.

Call (561) 475-3903

Which Cambria Models This Applies To

Cambria’s hardscape line breaks into three families, and the part you need depends on which was specified in your original install. The Cambria Classic series uses a 60mm paver with a beveled edge and proprietary interlock geometry that requires Cambria-branded edge restraints - aftermarket alternatives from Belgard or Techo-Bloc will seat but won’t lock under lateral load. The Cambria Permeable series, increasingly common in West Palm Beach for stormwater compliance, uses a wider joint spacer (nominal 6mm) and a different base aggregate spec; swapping standard sand for polymeric here actually voids the permeability warranty. The Cambria Pro series, their commercial-grade paver, runs 80mm thick and uses steel edge restraints rather than the PVC common in residential work.

To identify your series, check the paver edge for a stamped lot code - Classic shows a single letter, Permeable shows “P-” prefix, Pro shows a date stamp with no letter. If your original install documentation is missing, measure paver thickness at an exposed edge and note the joint width. We carry OEM Cambria edge restraints and spacers, plus vetted aftermarket equivalents where the spec matches - we won’t sell you a part that fits but fails, because we’ve seen what Florida’s wet season does to a mismatched edge restraint in Lake Worth and Wellington installs that skipped this check.

Signs Your Cambria Driveway & Pavers Is Failing

• Polymeric sand washing out between joints. In West Palm Beach, this usually means the original sand was never fully activated with water during install, or the paver pitch is wrong and water is sheeting across rather than draining through. The fix isn’t more sand - it’s regrading the base or switching to Cambria’s specified permeable joint material.
• Individual pavers rocking underfoot. This signals base erosion, often from a compromised edge restraint that let the bedding sand migrate. Left alone, the paver cracks or the neighboring units destabilize in a widening pattern.
• White haze or efflorescence on the surface. Common in Cambria’s lighter colorways installed near the Intracoastal, where salt air meets irrigation overspray. It’s not a paver defect - it’s soluble salts migrating through the concrete body - but aggressive acid washing will damage the surface and void any remaining material warranty.
• Sunken section near the garage apron or street edge. The vehicular load is concentrated here, and if the original base wasn’t compacted to 98% Proctor density with a geotextile separation layer, the subgrade pumps and the pavers follow. We’ve replaced sections in El Cid and Flamingo Park where this exact failure repeated every three years until the base was rebuilt correctly.
• Edge restraints pulling away from the perimeter. The PVC stakes rot in our sandy, acidic soil, or the restraint itself UV-degrades and snaps. Cambria Pro’s steel alternative lasts longer but costs more upfront - we quote both and let the owner decide.

Before

After

Replacement Cost & What’s Included

The range depends on three factors: how much base needs rebuilding versus just relaying existing pavers, whether your Cambria colorway is still in production for seamless matching, and access - tight side yards in older West Palm Beach neighborhoods like Northwood add labor hours. Every quote we write itemizes paver count, base material, edge restraint type, and joint fill separately. Under Clause 1 of The Haven Standard, that written price is locked before we touch a tool; no change order moves forward unsigned, which is how we’ve kept 4,000-plus projects within a few percent of the original number since 2007. The 365-Day Done Right Promise covers the workmanship; Cambria’s material warranty runs separately and we document both in your project binder.

DIY or Call Us?

There’s honest work a homeowner can do and work that costs more to fix than to hire. Checking for loose edge restraints, measuring joint width for sand quantity, or photographing the lot stamp for identification - that’s safe and useful. Relaying pavers yourself without checking base compaction, or pressure-washing efflorescence with acid from the hardware store, typically destroys the paver face or masks a base problem that returns worse in six months.

The real risk is structural: if your section has settled, the base is compromised and adding sand on top just delays the inevitable. We pull permits when required by West Palm Beach code, compact to spec with a plate tamper, and deliver a documented photo record of the base condition before pavers go back down. Call (561) 475-3903 and we’ll schedule a free estimate - written, itemized, no obligation.

FAQs