IKO Windows & Doors Nationwide

IKO Windows & Doors: The West Palm Beach Owner’s Guide

We stock and install IKO-compatible window and door replacements in West Palm Beach, with typical installed pricing from $4,500 to $15,000 for full window replacement and $8,000 to $25,000 for impact-rated units. Most standard IKO sash, frame, and hardware replacements are available same-day through our supplier network. Homeowners usually discover the failure when they notice drafts around the frame, see condensation between glass panes, or find the sash won’t stay open in a second-story bedroom after a humid summer.

Call (561) 475-3903

IKO’s window and door systems were installed widely across Florida from the late 1990s through the mid-2010s, particularly in communities like Flamingo Park and El Cid where the original builds are now hitting the 15-to-25-year mark. The coastal salt air, hurricane cycles, and near-constant humidity here accelerate seal degradation and hardware corrosion compared to inland markets. We’ve replaced IKO units along Flagler Drive where the salt spray off the Intracoastal had corroded the locking mechanisms beyond repair, and in Northwood where thermal expansion from summer heat cycles had warped the vinyl sashes.

Which IKO Models This Applies To

IKO sold window and door products under several series names in the Florida market. The most common are the IKO UltraView vinyl double-hung and sliding patio door systems, the IKO ProLine aluminum-clad wood windows, and the IKO StormShield impact-rated line that became code-required after the 2004 hurricane season. To identify your unit, check the spacer bar between glass panes for an etched IKO logo and series code, or look for a sticker on the frame’s interior track with a 6-to-10-digit model number beginning with “IK-” or “SS-“.

The critical compatibility gotcha: IKO changed its frame extrusion profiles in 2008, so a sash from a 2005 UltraView won’t seat properly in a 2010 frame even if the rough opening dimensions match. We verify this with a laser measure before ordering. For OEM versus aftermarket, IKO window parts are now distributed through a limited network, and some proprietary hardware, like the StormShield multi-point locking system, has no direct aftermarket equivalent. We source OEM where the spec demands it and use vetted equivalents from Truth Hardware or Amesbury for standard balances and rollers where the fit is verified.

Signs Your IKO Windows & Doors Is Failing

• Condensation or fog between glass panes. This means the insulated glass unit (IGU) seal has failed, allowing moist Florida air into the space between panes. The desiccant inside the spacer bar becomes saturated, and the thermal performance drops to that of a single pane. In West Palm Beach, we see this accelerate after age 12 due to UV exposure and thermal cycling.
• Sash drops or won’t stay open. The balance system, either a coil spring or block-and-tackle mechanism, has lost tension. On IKO double-hungs from the 2000s, the balance shoes often crack where they engage the sash pivot bar, especially on south-facing windows that bear afternoon heat.
• Drafts around the frame or sill. The weatherstripping has compressed or the frame has pulled away from the rough opening. In older West Palm Beach homes with stucco exteriors, the weep screed (the drainage channel at the sill) can clog with stucco debris, trapping water and rotting the sill pan.
• Difficulty locking or unlocking. The multi-point lock mechanism has corroded or the keeper has shifted. Salt air attacks the zinc-plated hardware IKO used pre-2010; we’ve found locks frozen solid in oceanfront units along A1A.
• Visible frame warping or vinyl discoloration. UV degradation has broken down the PVC compound, causing the frame to bow away from the glass edge. White vinyl turning chalky yellow is the early warning; by the time the sash binds, replacement is the only option.

Before

After

Replacement Cost & What’s Included

For West Palm Beach homeowners, IKO window replacement runs $4,500 to $15,000 for standard vinyl units and $8,000 to $25,000 for impact-rated installations, depending on count, size, and whether the original frames are preserved or fully replaced. Single IKO sash or IGU replacements range from $300 to $800 per unit including removal, disposal, and interior trim touch-up.

What drives the range: frame condition (rotted sills add $150 to $400 per opening), stucco repair needs, and whether the original installation used nail fins that require siding removal. Our written quote itemizes each line - frame, glass, hardware, labor, disposal - before any work starts, per Clause 1 of The Haven Standard. Every IKO replacement carries our 365-Day Done Right Promise and a documented photo record of the opening condition, installation sequence, and final seal test.

DIY or Call Us?

An owner can safely check three things: verify the model number from the frame sticker, test the lock and balance operation to describe the symptom accurately, and clear weep holes with a pipe cleaner to rule out drainage-related swelling. Beyond that, IKO window and door replacement involves risks that warrant a trained technician. Impact-rated units weigh 40 to 60 pounds per sash; improper handling cracks the laminated glass or strains the frame. Second-story work requires proper ladder tie-off and fall protection. And a poorly sealed replacement in West Palm Beach’s wind-driven rain environment invites water intrusion that won’t show until the wall cavity is damaged.

We’re an independent service provider, not affiliated with IKO. If you’re weighing a DIY fix against professional replacement, we’ll review your photos and give you a written price before anyone picks up a tool. Call (561) 475-3903 to schedule your free estimate.

FAQs