Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterTamko Roofing: The West Palm Beach Owner’s Guide
Tamko roof repair in West Palm Beach typically runs $400-$1,800 for most part replacements, with full Tamko-compatible roof replacement starting at $8,000. We stock common Tamko ridge caps, underlayment, and venting components for same-day installation on most Heritage and Titan XT series systems. Most West Palm Beach homeowners discover a Tamko part has failed after a driving rain from the east exposes a lifted ridge cap, or when attic inspection reveals brittle underlayment that’s cracked after five to seven years of Florida UV exposure.
Which Tamko Models This Applies To
Tamko’s Heritage series, Heritage Vintage, Heritage IR (impact-rated), and Titan XT lines are the systems we see across West Palm Beach neighborhoods from El Cid to Northwood. Each series uses distinct ridge vent profiles and underlayment specifications. Heritage shingles carry a 30-year limited warranty in most installations; Titan XT, with its reinforced nailing zone, carries a 50-year limited warranty and requires matching Titan XT ridge caps to maintain wind resistance ratings.
To identify your Tamko system, check the shingle bundle wrapper if you have it stored, or look for the printed manufacturing date and series code on the back of an exposed shingle tab. The nailing zone width differs materially: Heritage uses a 3/4-inch nailing strip, while Titan XT extends to 1 1/4 inches. Using a standard Heritage ridge cap on a Titan XT system voids the wind warranty and creates a lift point we’ve seen fail at 45 mph gusts along Flagler Drive.
We source OEM Tamko components where the warranty is still active, and specify equivalent aftermarket products, such as Atlas or CertainTeed matching profiles, only when the original series is discontinued or when the homeowner requests a compatible upgrade. The decision is documented in the written quote before work starts.
Signs Your Tamko Roofing Is Failing
- Lifted or missing ridge caps along the peak. Tamko ridge caps rely on a dual-seal adhesive strip that degrades faster in West Palm Beach’s salt-air environment than inland Florida installations. Once the seal fails, cap nails work loose within two to three storm cycles.
- Granule accumulation in gutters or downspout elbows. Heavy granule loss on Tamko Heritage shingles, especially on south-facing slopes, indicates the asphalt mat is beginning to expose. In West Palm Beach, we typically see this at year 12 to 15 on Heritage and year 18 to 22 on Titan XT.
- Cracked or curled shingle tabs, particularly at valleys and penetrations. Thermal cycling between 95-degree days and 72-degree nights hardens the SBS-modified asphalt in Tamko’s premium lines; standard organic-mat shingles show this earlier. The crack pattern runs perpendicular to the tab edge, unlike wind tear which follows the tab contour.
- Water staining on rafter tails or soffit vents after sustained easterly winds. This points to compromised underlayment at the eave edge, where Tamko’s MetalEdge drip edge meets the first course of shingles. The salt-laden air at the coast accelerates fastener corrosion here.
- Sagging between trusses visible from the attic. Indicates degraded decking, often from long-term underlayment failure that allowed condensation rather than bulk water intrusion. Tamko’s 30-pound felt underlayment, common on pre-2015 West Palm Beach builds, becomes brittle and tears at fasteners.
BeforeAfterReplacement Cost & What’s Included
| Service | West Palm Beach Price Range | What’s Included |
|---|---|---|
| Tamko ridge cap replacement (up to 40 linear ft) | $400-$900 | OEM or matched cap, ice-and-water shield at peak, labor, disposal |
| Underlayment section repair (up to 200 sq ft) | $600-$1,400 | Tear-off to deck, synthetic underlayment, re-shingle match, photo record |
| Full Tamko roof replacement | $8,000-$20,000 | Complete tear-off, deck inspection, new underlayment, shingles, vents, cleanup, written warranty |
| Metal edge drip replacement | $350-$800 | Removal, new flashing, sealant, shingle integration |
The range depends on roof pitch (steeper = more labor), deck condition if tear-off is required, and whether we’re matching discontinued Tamko colors like Thunderstorm Gray or Rustic Slate that now require custom-order lot matching. Under Clause 1 of the Haven Standard, the written price you receive before work starts is the price you pay; no change proceeds without a signed change order. Every Tamko repair includes our 365-Day Done Right Promise and a documented photo record of deck condition, fastener placement, and finished work.
DIY or Call Us?
There’s a safe middle ground and a hard stop. A homeowner can walk the perimeter with binoculars to spot lifted caps, check the attic for staining patterns after rain, and photograph shingle labels for us to review. What you should not do: climb a pitched roof to pry up a cap to check nail condition, or attempt to heat-seal a lifted tab with a propane torch. The sealant on Tamko shingles activates at manufacturer-specified temperatures that a handheld torch will exceed, scorching the asphalt and creating a brittle point guaranteed to crack within six months.
More critically, ridge cap replacement requires working at the roof peak on a ladder or harness system. Falls from single-story eave height cause the majority of residential roofing fatalities in Florida. We carry workers’ compensation and general liability specifically for this exposure; your homeowner’s policy almost certainly does not cover you for self-performed roofing work.
Call (561) 475-3903 and we’ll schedule a free inspection. If you have a competitor’s written estimate for the same Tamko repair, bring it. We’ll review it line by line at no charge under our Free Second Opinion offer.
FAQs
Tamko Heritage shingles in West Palm Beach’s coastal climate typically perform 18 to 22 years, with the first component failures appearing at year 10 to 12. Titan XT and Heritage IR systems, with their heavier granule embedment and reinforced nailing zones, regularly reach 25 to 30 years when properly ventilated. Salt air and UV exposure are the primary accelerants; we inspect annually after year 12. Call (561) 475-3903 to schedule an inspection and get an exact condition assessment.
Individual ridge caps and limited underlayment sections can be spot-repaired if the surrounding shingles remain flexible and the deck is sound. We do not recommend patching when granule loss exceeds 30 percent on adjacent shingles or when the underlayment failure extends more than 18 inches from the visible leak point. The patch becomes the new weak point. We’ll show you both options in the written quote with prices for each. Call (561) 475-3903 for a free estimate.
Most ridge cap and flashing replacements are completed in four to six hours. Underlayment section repairs run one to two days depending on square footage and whether deck replacement is required. Full roof replacement on a typical West Palm Beach single-family home takes three to five days, including permit pulling and inspection scheduling. We do not promise same-day completion on full replacements; the work requires dry conditions and municipal inspection. Call (561) 475-3903 to schedule and get a written timeline with your quote.
We stock ridge caps, starter strips, and synthetic underlayment compatible with current Tamko series on our West Palm Beach trucks. Discontinued colors and specialty items, such as Heritage Vintage laminated caps in specific lots, typically require two to three business days to source from Tamko’s Tampa distribution center. We confirm stock availability when you call and before we write the quote. Call (561) 475-3903 to check current inventory for your specific Tamko series and color.
Rowan Construction Group West Palm Beach is an independent service provider and is not affiliated with, endorsed by, or a distributor for Tamko Building Products. We source Tamko-compatible components through standard wholesale channels and stand behind our installation workmanship under the Haven Standard.
We’ve handled Tamko systems from the historic homes near the Norton Museum to newer construction out toward Wellington, and the pattern is consistent: Florida’s climate finds the weak point in every roofing assembly, but it finds it faster when the part specification is wrong or the installation detail is rushed. Measure twice, document everything, then get out of the way and let the work speak. That’s how we’ve kept projects within a few percent of the agreed price across 4,000-plus jobs since 2007.
Written by Grant Rowan, Owner, Rowan Construction Group West Palm Beach at Rowan Construction Group West Palm Beach, serving West Palm Beach and nearby areas.