Tamko Windows & Doors Nationwide

Tamko Windows & Doors: The West Palm Beach Owner’s Guide

We stock and install Tamko-compatible windows and doors across West Palm Beach, with most replacement parts available same-day and full unit installations typically running $4,500-$15,000 depending on opening count, frame condition, and whether you’re upgrading to impact-rated glass. In our experience along Flagler Drive and throughout the El Cid and Flamingo Park neighborhoods, owners usually discover a problem when they notice water staining the drywall after a summer storm, or when a window that used to glide open starts sticking in the track - signs that the weatherstripping, balance mechanism, or frame seal has reached its end.

Call (561) 475-3903

Which Tamko Models This Applies To

Tamko’s window and door lines have shifted over the years, and the part you need depends on when your unit was manufactured. The Tamko 400 Series vinyl windows, common in Florida builds from the mid-2000s through about 2015, used a proprietary tilt-latch and balance shoe system that differs from the hardware found in the later Tamko 500 Series and Tamko Pro lines. The 400 Series balance shoe measures 1-1/4 inches wide with a T-lock cam; the 500 Series moved to a 1-inch shoe with a snap-in design that is not backward compatible. If your window has a Tamko label in the head jamb or on the spacer bar between panes, photograph it - the series code and manufacturing date tell us exactly which hardware kit to bring.

For doors, Tamko’s fiberglass entry systems and vinyl patio doors used two different roller and track assemblies. The Tamko patio door roller (pre-2012) carries a 1-1/2 inch stainless steel wheel on an adjustable nylon housing; post-2012 units switched to a sealed bearing roller that requires a different frame bracket. We carry both OEM-spec and quality aftermarket equivalents from Truth Hardware and Amesbury. The aftermarket rollers we stock meet the same 125-pound dynamic load rating and carry a comparable warranty at roughly 30% less cost. One compatibility gotcha we see regularly in West Palm Beach: homeowners buy a generic 1-1/4 inch balance shoe thinking it’ll fit their 400 Series, only to find the cam geometry is wrong and the sash won’t stay up. Measure twice, document everything, then get out of the way and let the work speak.

Signs Your Tamko Windows & Doors Is Failing

• Condensation between double-pane glass. The insulated glass unit (IGU) seal has failed, allowing moist South Florida air into the cavity. In West Palm Beach’s humidity, this worsens quickly and the Low-E coating degrades, reducing energy performance even before the fog becomes visible.
• Sash drops or won’t stay open. The balance spring or block-and-tackle mechanism has lost tension. On Tamko 400 Series units, the balance shoe wears where it rides the pivot bar, and once the cam rounds over, the sash will not lock in position.
• Air leaks or whistling at the frame perimeter. The compression weatherstripping has hardened or the sill track gasket has compressed permanently. We see this accelerated on west-facing elevations in West Palm Beach, where afternoon sun and UV exposure age vinyl faster than the manufacturer’s 10-year specification assumes.
• Difficulty locking or latching. The keep striker has shifted due to frame settlement, or the multipoint lock mechanism has corroded. Coastal salt air accelerates this; we inspect the full lock rail, not just the handle, because a failed lower shootbolt is what actually lets the sash rattle in a storm.
• Water intrusion at the sill or jamb. The weep system is clogged with debris, or the end dam sealant has separated from the frame. On Tamko vinyl windows, the weep holes are concealed under a snap-in cover that homeowners often paint over, trapping water in the sill chamber.

Before

After

Replacement Cost & What’s Included

For West Palm Beach homeowners, Tamko window replacement falls within our standard Window Replacement range of $4,500-$15,000 for a typical home with 8-15 openings. Single-part repairs are priced separately: a failed IGU runs $280-$450 per sash including removal, disposal, and new glass with Low-E and argon fill; balance mechanism replacement is $180-$320 per window; weatherstripping replacement is $95-$175 per opening; patio door roller and track service is $340-$580.

What drives the range: unit size, whether the frame is square and structurally sound, and whether we’re matching existing exterior trim or integrating with stucco or Hardie board. Every quote we deliver in West Palm Beach is a flat written price with a written scope - under Clause 1 of the Haven Standard, the number is fixed before anyone picks up a tool. Our 365-Day Done Right Promise covers the installation, and the glass and hardware carry the manufacturer’s warranty. No change order gets executed without your signature, which is the discipline that has kept our projects within a few percent of the agreed price since 2007.

DIY or Call Us?

There is safe owner-level inspection and there is work that belongs to a trained technician. You can check whether the weep holes are clear, whether the weatherstripping has visible cracks, or whether the sash label identifies your series - all of that helps us bring the right part on the first visit. What we do not recommend: removing a fixed sash to access a balance mechanism, adjusting a warped frame, or attempting to reglaze an IGU. The spring tension in a block-and-tackle balance can release suddenly, and a dropped sash in a second-story opening is a genuine hazard. For patio door rollers, the unit must be lifted from the track, which typically requires two people and proper support blocking to avoid frame distortion.

We carry Tamko-compatible parts on our service vehicles in West Palm Beach, and our background-checked, uniformed technicians arrive with a documented photo record system included as standard. If you’re unsure what you’ve got, call (561) 475-3903 and we’ll walk through the identification before scheduling. Estimates are free, and we offer a Free Second Opinion on any written estimate you’ve already received.

FAQs