Tamko Driveway & Pavers Nationwide

Tamko Driveway & Pavers: The West Palm Beach Owner’s Guide

We stock and install Tamko-compatible driveway and paver systems in West Palm Beach, with typical paver driveway installations running $7,000-$18,000 and concrete driveways at $4,500-$12,000 depending on substrate condition and square footage. Most Tamko paver pattern matches and color blends are available same-day through our supplier network, and we carry common edge restraints, bedding sand specs, and polymeric sand in the truck. West Palm Beach homeowners usually discover a problem when settling creates visible dips after heavy rain, or when the original polymeric sand washes out from the gap between pavers, leaving weeds and ant colonies where a tight joint used to be.

Call (561) 475-3903

Which Tamko Models This Applies To

Tamko’s paver line centers on the Heritage Series and Classic Collection, with the Heritage offering the thicker 2-3/8 inch profile designed for vehicular traffic and the Classic running 2-1/4 inches, better suited to patios and walkways. The part number is stamped on the pallet tag, not the paver itself, so photograph the delivery documentation before it gets lost. For color matching, Tamko uses a two-number system: the first digit indicates the base color family, the second the surface texture variation. In West Palm Beach, we see the most call volume for Heritage #52 (Chesapeake Blend) and Classic #31 (Autumn Red), both of which fade differently in Florida’s UV than the catalog suggests.

OEM Tamko pavers are the only guaranteed color match, but for edge restraints and bedding layers, we use PermaEdge and Techniseal equivalents that meet the same ASTM C936 spec. The compatibility gotcha: Tamko’s Heritage 2-3/8 inch pavers require a 1-inch bedding sand layer, not the 3/4 inch some crews default to. That extra quarter-inch is what prevents the rocking and joint failure we see in three-year-old installs around the Northwood Historic District.

Signs Your Tamko Driveway & Pavers Is Failing

• Visible settling or dips, especially after rain. This usually means the base material, typically crushed concrete or limestone screenings, was inadequately compacted in lifts. Water penetrates, erodes the fines, and the paver surface follows the void below. In West Palm Beach’s sandy soils, we see this most often where the original contractor skipped the geotextile fabric layer.
• Weeds or grass growing between joints. Polymeric sand breaks down under pressure washing, and Florida’s afternoon thunderstorms accelerate the washout. Once the joint is open, organic matter collects and germinates. The fix is removal, re-sanding with fresh polymeric, and reactivation with a light mist, not a blast.
• Pavers rocking under foot or tire. Individual movement indicates loss of bedding sand beneath that specific unit, often from ant excavation or localized water intrusion. Left alone, the rocking paver chips at the edges and the problem spreads to neighbors.
• Efflorescence, the white chalky film on the surface. This is calcium hydroxide migrating from the concrete body of the paver, common in Tamko’s lighter blends. It is not structural damage, but in West Palm Beach’s humidity it can persist for months unless treated with a specific efflorescence cleaner, not muriatic acid.
• Edge restraint pulling away from the perimeter. Plastic or aluminum edge restraints rely on stakes driven into the base. When the base softens or the stakes corrode in our salt-air environment, the edge creeps outward and the field pavers lose lateral support. This is the failure that turns a localized problem into a full redo.

Before

After

Replacement Cost & What’s Included

The wide range on full installations reflects three variables: square footage, substrate condition, and access. A 600-square-foot driveway on compacted fill with clear side access sits at the lower end. The same footprint with a failed shell base, poor drainage, and a gate too narrow for a mini-excavator pushes toward the top. Under Clause 1 of the Haven Standard, you get the written price before we touch a tool. The quote is flat, with line items for each layer, and no change proceeds without your signature on a change order. Our 365-Day Done Right Promise covers the workmanship; material defects fall to Tamko’s limited warranty, which we document and file on your behalf.

DIY or Call Us?

There is safe owner inspection and there is work that requires the right base preparation knowledge. You can check for loose edge restraints, photograph the paver stamp or pallet tag for identification, and clear vegetation from joints. Do not attempt to relay settled pavers yourself without understanding base compaction: in Florida’s sandy soils, the base must be compacted in 6-inch lifts to 98% standard Proctor density, verified with a nuclear gauge. Skip this, and the repair fails in one rainy season.

Polymeric sand installation looks simple but demands precise joint depth, completely dry pavers, and a misting technique that activates the binder without washing it out. We have re-dozens of West Palm Beach driveways where the homeowner’s weekend project turned into a haze-stained, improperly bonded mess. For the base work and anything involving cutting with a wet saw, call (561) 475-3903 and we will schedule a free estimate with a written scope and price.

FAQs