Belgard Windows & Doors Nationwide

Belgard Windows & Doors: The West Palm Beach Owner’s Guide

Belgard windows and doors replacement in West Palm Beach typically runs $4,500-$15,000 for a full window replacement and $8,000-$25,000 for impact-rated installations, with most hardware and component repairs quoted same-day once we identify your series. We stock Belgard-compatible rollers, locks, weatherstripping, and sash hardware for the coastal series most common in Palm Beach County, and we carry the documentation to match your exact part number. Most owners first notice the problem when a window won’t stay open in a gust off the Intracoastal, or when the locking mechanism grinds after a wet season.

Call (561) 475-3903

Which Belgard Models This Applies To

Belgard’s window and door catalog breaks into three residential tiers: the Coastal Impact Series, the Select Vinyl line, and the Architect Aluminum commercial-grade frames found in downtown West Palm Beach condos along Flagler Drive and in newer construction west of I-95. The part you need depends on which generation you own. Pre-2018 Coastal Impact units used a two-point locking system with a 7/16-inch backset; post-2018 models switched to a 5/8-inch backset to meet updated Miami-Dade HVHZ requirements, and the latches are not interchangeable.

To identify your series, check the etched code in the glass corner (NFRC label) or the stamped aluminum tag on the frame edge. The model prefix tells us everything: CI for Coastal Impact, SV for Select Vinyl, AA for Architect Aluminum. We source OEM Belgard hardware through our distributor in Fort Lauderdale, but for discontinued latches and rollers we spec truth-equivalent aftermarket parts from Amesbury and Truth Hardware that carry the same 10-year coastal corrosion warranty. The decision between OEM and aftermarket comes down to whether your unit is still under Belgard’s original 20-year glass warranty; mixing non-OEM hardware in a warranty-registered frame can void glass coverage, so we check your registration status before quoting.

Signs Your Belgard Windows & Doors Is Failing

• The sash drops or won’t stay open. This usually means the balance system has lost tension. In West Palm Beach’s salt air, the galvanized steel coil springs in pre-2020 Select Vinyl units corrode internally before showing external rust, so the failure feels sudden when the spring finally snaps.
• Locking mechanism sticks or grinds. The multipoint lock faceplates collect grit from beach-adjacent properties, but more often the internal cam wears where the handle spindle meets the gearbox. We see this first on east-facing units in Juno Beach and Jupiter that get direct salt spray.
• Visible moisture between glass panes. The insulated glass unit (IGU) seal has failed. In Florida’s thermal cycling, the desiccant inside the spacer bar saturates after 8-12 years; once it’s full, condensation becomes permanent and the Low-E coating degrades.
• Draft around the frame perimeter. Compression weatherstripping loses memory in sustained heat. Belgard’s original EPDM gaskets harden faster in unshaded south- and west-facing walls, which is why we see this pattern first in homes without porch overhangs.
• Roller assembly chatters or jumps the track. The Delrin wheel bearings in sliding door trolleys flatten under load, especially on 8-foot and 10-foot panels common in West Palm Beach’s 2015-2022 builds. The flat spot creates a rhythmic thump you can feel through the floor.

Before

After

Replacement Cost & What’s Included

Component-level repairs for Belgard hardware in West Palm Beach run $180-$650 installed, depending on whether we’re replacing a single balance cartridge or rebuilding a full multipoint lock. Full sash or IGU replacement ranges $400-$1,200 per opening. Complete window replacement stays in the $4,500-$15,000 range for standard vinyl, and $8,000-$25,000 for impact-rated units meeting Florida Building Code TAS 201.

Every quote from Rowan Construction Group West Palm Beach is a flat written price with line-item parts and labor, delivered before work starts. Under Clause 1 of the Haven Standard, that number does not change unless you sign a change order. Our 365-Day Done Right Promise covers the installation and the hardware we supply. We pull permits when required by Palm Beach County, and every visit includes a documented photo record of the condition we found and the work we performed.

DIY or Call Us?

There’s a safe middle ground here. An owner can check the model tag location, photograph the failed part, and verify whether the window is under warranty - all of which saves us time and saves you a trip charge. What we don’t recommend is removing a sash with a failed balance, disassembling a multipoint lock, or handling large glass units. The spring tension in a window balance can release unpredictably, and a 40-pound vinyl sash with a broken cord drops fast. We’ve been called to West Palm Beach homes where the DIY attempt cracked the IGU or damaged the frame track, turning a $280 balance replacement into a $900 sash rebuild. If you’re unsure of the series or the part number, call (561) 475-3903 and we’ll walk through the identification before scheduling. Measure twice, document everything, then get out of the way and let the work speak.

FAQs