Boral Driveway & Pavers Nationwide

Boral Driveway & Pavers: The West Palm Beach Owner’s Guide

We stock and install Boral-compatible pavers and driveway systems in West Palm Beach, with typical paver driveway replacement running $7,000-$18,000 and sealing at $250-$700. Most Boral pattern matches and color lots can be sourced within 48 hours through our network of fifty-plus vetted material brands. Homeowners usually discover a problem when settling creates trip hazards after heavy rain, efflorescence blooms across the surface, or individual pavers crack under the load of a delivery truck - all signs that the base, bedding layer, or the paver itself has failed.

Call (561) 475-3903

Which Boral Models This Applies To

Boral’s hardscape line in Florida centered on the Oldcastle Architectural paver collections, which Boral acquired and distributed before the brand was absorbed into the broader Oldcastle Infrastructure family. The most common Boral-labeled products we encounter in West Palm Beach are the Coventry Stone, Dublin Cobble, and Bergerac patterns, typically in 60mm and 80mm thicknesses. Check the edge of an intact paver for a molded “Boral” or “Oldcastle” stamp, or measure the module: Coventry runs 5.5″ × 8″ × 2.36″ for the 60mm unit, while Dublin Cobble uses a three-piece random pattern with 6″ × 6″, 6″ × 9″, and 6″ × 12″ modules.

The compatibility gotcha in this market is color lot drift. Boral’s Florida color palette - Tuscan Blend, Sierra, Autumn Haze - shifted formulations across production years, so a 2016 Tuscan Blend does not match a 2022 Tuscan Blend even if the catalog name is identical. We always pull a sample from the existing field and cross-reference against current Oldcastle swatches before ordering. For OEM-true replacement, we source through Oldcastle’s remaining Boral-branded inventory; for functional equivalent, we match to Belgard or Techo-Bloc with comparable compressive strength (8,000 PSI minimum) and slip resistance (0.42 wet coefficient).

Signs Your Boral Driveway & Pavers Is Failing

• Stepping or rocking underfoot. The bedding sand has washed out or the base has settled, usually because the edge restraint failed or the joint sand was never properly polymeric-hardened. In West Palm Beach, our summer downpours accelerate this if the grade was pitched toward the house rather than away.
• White chalky film (efflorescence) that returns after cleaning. Calcium hydroxide is migrating through the paver body from the cementitious base or bedding layer below. Persistent efflorescence often signals a drainage failure beneath the pavers, not a surface problem.
• Cracks spidering across individual units, not the joints. The paver itself is overloaded - common when a 60mm residential-grade Boral product was installed in a driveway that regularly sees 3/4-ton trucks or RV parking. The spec mismatch shows up three to five years in.
• Weeds or ant mounds erupting through joint lines. Joint sand has degraded or was never compacted to refusal during original install. Florida’s sandy native soil makes this worse; the subgrade migrates upward and creates voids.
• Standing water more than 30 minutes after rain. The original pitch was insufficient (1/4″ per foot minimum for clay-based pavers) or the base has settled into a bowl. In West Palm Beach’s flat coastal terrain, this often means the driveway was built to the wrong elevation relative to the swale.

Before

After

Replacement Cost & What’s Included

The range driver is access and salvageability. A driveway with tight side-yard access in El Cid or Flamingo Park costs more to excavate than a wide-open slab in The Acreage. Under Clause 1 of the Haven Standard, you get the written price before we touch a tool - every line item specified, no allowance categories left floating. The 365-Day Done Right Promise covers settling, joint failure, or paver defect at no charge. We pull permits when required by Palm Beach County for driveway replacement exceeding 25% of the surface area, and inspections pass before we invoice.

DIY or Call Us?

What you can safely check: measure the affected area, photograph the paver stamp or any remaining packaging, and verify whether water drains toward your foundation or toward the street. Mark the worst-settled corner with spray paint so we can see the full picture when we arrive.

Where DIY goes wrong: excavating to the wrong base depth (Florida requires 6″ minimum of compacted limerock for vehicular loads, not the 4″ you might find online), reusing degraded bedding sand, or guessing at the pitch. The real risk is spending a weekend and $800 in materials, only to have the same failure recur in 18 months because the base was never addressed. We bring plate compactors, laser levels, and moisture-density testing - the tools that turn a repair into a lasting repair.

Rowan Construction Group West Palm Beach is an independent service provider; we are not affiliated with Boral or Oldcastle. Call (561) 475-3903 to schedule your free estimate. We’ll match your existing pattern, quote the full scope in writing, and show you the photo record from every visit.

FAQs