CWS Bathroom Remodeling Nationwide

CWS Bathroom Remodeling: The West Palm Beach Owner’s Guide

We stock and install CWS-compatible bathroom remodeling components in West Palm Beach, with typical installed project costs running $9,000-$28,000 depending on scope. Most CWS owners in West Palm Beach first notice trouble when their vanity cabinet doors won’t stay aligned after a humid summer, or when the soft-close drawer slides start catching halfway through travel. That’s usually the polymer glide system degrading in Florida’s salt-air environment, not the cabinet box itself.

Call (561) 475-3903

Which CWS Models This Applies To

CWS, or Cabinetry by CWS, produces several lines that have circulated through West Palm Beach since the early 2000s. The most common we encounter are the CWS Classic Series (frameless, 3/4-inch plywood box with thermofoil door fronts), the CWS Designer Series (partial-overlay hardwood frames with MDF center panels), and the CWS Euro Slimline (full-access frameless with 2mm PVC edge banding). Check the hinge cup bore: Classic Series uses a 35mm cup with 5mm overlay, Designer Series runs 6mm, and Euro Slimline uses Blum-style 110-degree clip-top hinges with 3mm adjustment cams. The sticker is usually inside the sink base door, upper left corner, printed with a six-digit lot code starting with the year.

OEM CWS parts are limited since the company shifted distribution in 2019. We source direct-fit hardware from Hettich and Grass for glide systems, and Salice for hinge sets, spec-matched to the original bore patterns. For door fronts and drawer faces, we fabricate matched replacements in our shop rather than hunt discontinued OEM stock. That’s the practical difference: an OEM purist waits eight weeks for maybe-compatible parts, while we measure, build, and install in a standard project window.

Signs Your CWS Bathroom Remodeling Is Failing

• Drawer fronts sag or bind. The CWS polymer glide brackets crack at the rear anchor point, especially in upper cabinets loaded with hair tools and product bottles. The drawer still moves, but the front drops 1/8 inch and the side clearance goes uneven.
• Door gaps shift seasonally. Thermofoil CWS doors expand and contract with West Palm Beach’s humidity swings, and the original 3mm gap setting becomes a 6mm gap by October. The hinge itself isn’t failed; the adjustment cam has reached its travel limit.
• Soft-close mechanism bangs shut. The Blumotion or equivalent damper cylinder loses hydraulic pressure after 7-10 years of daily use. On CWS Euro Slimline, this is a field-replaceable cartridge. On Classic Series, it’s hinge-integrated and requires the full hinge set.
• Sink base floor delaminates. CWS Classic used a particleboard core with melamine face in pre-2012 production. Slow leaks from P-trap fittings wick upward, and the floor swells at the rear corner nearest the plumbing wall. You smell it before you see it.
• Side panel laminate peels at the sink cutout. The CWS factory seal on laminate edges degrades where the countertop installer trimmed for the vessel or undermount sink. Moisture enters the seam, and the laminate releases in a 2-3 inch bubble.

Before

After

Replacement Cost & What’s Included

A full CWS bathroom remodel in West Palm Beach runs $9,000-$28,000 installed. Partial component replacement, what most CWS owners actually need, breaks down as follows:

• Vanity cabinet replacement (sink base + two wall cabinets): $3,200-$7,500
• Drawer glide system overhaul (all drawers, hardware only): $480-$920
• Hinge and door alignment reset (per door, parts + labor): $85-$140
• Sink base floor rebuild (new plywood core, laminated, installed): $650-$1,100
• Countertop replacement (quartz or solid surface, fabricated): $2,000-$6,500
• Full bathroom remodel, CWS-compatible cabinetry, turnkey: $9,000-$28,000

What drives the range: box construction (plywood vs. particleboard), door material (thermofoil vs. painted hardwood), and whether we’re matching existing trim profiles in a 1980s West Palm Beach condo or starting fresh in a teardown rebuild near Flagler Drive. Under Clause 1 of The Haven Standard, you get the written price before anyone picks up a tool. The quote is flat, with line-item scope and a written warranty. No change proceeds without a signed change order, which is why our projects finish within a few percent of the number you agreed to.

DIY or Call Us?

There’s a safe middle ground for CWS owners. You can check the hinge model number, measure drawer box dimensions, and photograph the lot code sticker without risk. What goes wrong: forcing a stuck drawer with a degraded glide bracket cracks the box sidewall, turning a $140 glide replacement into a $700 cabinet rebuild. Attempting to re-bore hinge cups without a jig drifts the pattern 2mm, and the door never hangs true again. The polymer glide anchors in CWS cabinets are torque-sensitive; over-tighten into stripped particleboard, and the mechanical fastener becomes a wall anchor with no purchase.

We carry Hettich and Grass glide sets, Salice hinge assortments, and moisture-rated plywood floor panels on our West Palm Beach trucks. Most CWS component replacements finish in a single day. Call (561) 475-3903 to schedule your free estimate.

FAQs