CWS Kitchen Remodeling Nationwide

CWS Kitchen Remodeling: The West Palm Beach Owner’s Guide

CWS kitchen remodeling in West Palm Beach typically runs $14,000-$45,000 installed, depending on cabinet grade, layout changes, and whether we’re moving plumbing or electrical. We stock CWS-compatible cabinet hardware, drawer slide systems, and hinge sets on our West Palm Beach trucks, and most kitchen component replacements can be scheduled within a few business days. Homeowners usually discover a CWS part has failed when a soft-close drawer slams shut, a wall cabinet door drifts open, or a pull-out shelf binds after years of Florida humidity swelling the particleboard core.

Call (561) 475-3903

Which CWS Models This Applies To

CWS, or Cabinetry by CWS, produces frameless European-style cabinets in several product lines that have circulated through South Florida builders since the early 2000s. The most common we encounter in West Palm Beach are the CWS Classic Series, CWS Signature Series, and the contractor-grade CWS Builder’s Choice line installed in production homes from Jupiter down to Boynton Beach. To identify your series, check the hinge cup bore pattern: Classic Series uses a 35mm cup with three adjustment screws in a triangular layout, while Signature moved to a two-screw linear pattern after 2012. The Builder’s Choice line often lacks any interior stamp, so we measure wall cabinet depth (typically 12 inches for Builder’s Choice versus 13 inches for Classic) and check the drawer box construction: Classic uses 5/8-inch solid wood sides with dovetail joints, Builder’s Choice uses 1/2-inch stapled particleboard.

For OEM versus aftermarket on CWS specifically, we source Blum and Grass hinge assemblies as direct replacements for failed CWS hardware, since CWS did not manufacture its own slides or hinges. The Blum Compact 33 hinge fits Classic Series bores exactly; Grass Nexis adapts to Signature. Aftermarket drawer slides from Fulterer match the 75-pound load rating of original CWS spec, though we upgrade to 100-pound soft-close slides when the original boxes are still square. One compatibility gotcha: CWS wall cabinets from 2008-2014 used a non-standard 4.5-inch hinge boring pattern that Blum’s standard 3.5-inch plate won’t cover without a filler strip. We carry both plates on the truck because we’ve run into this on three Flagler Drive renovations this past year.

Signs Your CWS Kitchen Remodeling Is Failing

• Drawer fronts tilt or drop when loaded. The CWS undermount slide has lost its nylon roller or the particleboard drawer box has cracked at the rear mounting bracket. In West Palm Beach’s humidity cycle, particleboard swells at the screw holes and the bracket pulls through; we see this most in lower cabinets near dishwashers where heat accelerates the breakdown.
• Wall cabinet doors won’t stay closed or hang crooked. The 35mm hinge cup has wallowed out in the MDF door, or the hinge spring has fatigued after 10,000 open-close cycles. CWS Classic doors over 24 inches tall used only two hinges, which is adequate for 3/4-inch MDF but marginal for the solid-core upgrades some homeowners added later.
• Pull-out shelves bind or scrape the cabinet sides. The CWS shelf slide has bent from overloading, or the cabinet box itself has gone out of square. Florida’s seasonal humidity swing, 45% in January to 85% in August, moves frameless cabinets more than face-frame construction; we check diagonal measurements before blaming the slide.
• Soft-close mechanism no longer catches. The hydraulic cylinder in the Blum or Grass hinge has leaked its silicone fluid, a wear item with roughly 8-12 year lifespan in normal use. The salt air in coastal West Palm Beach homes, even inland of I-95, seems to shorten this by corroding the cylinder pin.
• Laminate peeling at drawer or door edges. CWS used a PVC edge banding with hot-melt adhesive that degrades above 120°F, which happens in closed West Palm Beach garages during cabinet storage or in kitchens with south-facing windows and no awning. Once moisture gets under the banding, the substrate swells and the bond fails progressively.

Before

After

Replacement Cost & What’s Included

The range depends on three factors: whether we’re matching existing CWS door profiles (discontinued styles require custom milling), how many cabinets need structural repair versus hardware swap, and whether the original installation used proper blocking for wall cabinets. Under Clause 1 of the Haven Standard, you get a written line-item price before we start, and no change proceeds without a signed change order. Our 365-Day Done Right Promise covers the installation and hardware; manufacturer defects on Blum or Grass components are handled through their warranty, which we file for you. Every visit includes a documented photo record, standard, so you see the failed part and the installed replacement.

DIY or Call Us?

There’s a safe middle ground for CWS cabinet issues. An owner can check whether a hinge screw has simply backed out, whether a drawer slide is blocked by debris, or whether the problem is the box and not the hardware. A Phillips head and a flashlight will answer most of those questions in ten minutes.

Where DIY goes wrong: drilling a new hinge bore without a 35mm Forstner bit and a drilling guide guarantees an off-center hole that won’t seal properly. Replacing drawer slides in a frameless cabinet requires supporting the box while both slides are detached, and a dropped 30-inch drawer of dishes is a real injury risk. If the cabinet box is out of square, shimming a new slide to fit the distortion only accelerates the next failure. We carry jigs, supports, and replacement boxes on the truck for exactly these situations. Call (561) 475-3903 and we’ll schedule a free estimate, show you what failed, and give you the written price before any work starts.

FAQs