IKO Fence Installation Nationwide

IKO Fence Installation: The West Palm Beach Owner’s Guide

IKO fence installation in West Palm Beach typically runs $3,500-$9,000 for a complete vinyl system, with most residential projects quoted as a flat written price before any post goes in the ground. We stock IKO-compatible posts, rails, and pickets for same-week scheduling, and we carry the full color palette IKO produces for South Florida’s UV exposure. Most owners realize something’s wrong when posts lean after a storm, gates sag and won’t latch, or pickets start cracking at the mounting holes - usually three to five years in, sooner if the original installer skipped the concrete footing depth.

Call (561) 475-3903

Which IKO Models This Applies To

IKO’s fence line breaks into three series that matter for parts matching: the residential-grade Classic, the reinforced Premium, and the commercial-spec Titan. The Classic uses 5-inch square posts with wall thickness of .080 inches; the Premium steps up to .100 inches and adds an internal rib. The Titan jumps to 6-inch posts at .125 inches, meant for wind-load zones above 120 mph. You can identify your series by the embossed code on the post cap underside - “CL,” “PR,” or “TN” followed by a two-digit year.

The gotcha in West Palm Beach is the 2019-2021 Classic production run, which used a different rail-lock profile that looks identical but won’t seat with current replacement rails. We’ve got both profiles on the truck. For OEM versus aftermarket, IKO’s own rails and pickets carry a 20-year color fade warranty that most aftermarket equivalents don’t match; we source OEM for anything visible and use qualified aftermarket for internal brackets and hardware where the spec is identical.

Rowan Construction Group West Palm Beach is an independent service provider - not affiliated with IKO - and we document the part numbers on every invoice so you have a record.

Signs Your IKO Fence Installation Is Failing

• Post lean after ordinary storms. The concrete footing cracked or was poured too shallow to start. In West Palm Beach, we see this constantly on installations where the crew stopped at 18 inches instead of the 24-inch minimum our soil conditions need.
• Gate sag that worsens monthly. The hinge post is rotating in its footing or the rail-to-post connection has stripped out. IKO’s gate kits use a heavier gauge bracket that most generic replacements won’t match.
• Picket cracking at mounting holes. UV degradation weakens the vinyl at stress concentrators. IKO’s South Florida color formulations from 2018 onward use more titanium dioxide; older pickets fail faster.
• Rail popping out of brackets. Thermal expansion in West Palm Beach’s 90-degree daily swings exceeds what the original snap-lock was designed for. The Premium and Titan series added a secondary set-screw for exactly this reason.
• Bottom rail filling with water and algae. The end caps failed or were never sealed. IKO’s drain-hole detail is small and clogs; we drill supplemental weep holes on every repair.

Before

After

Replacement Cost & What’s Included

What drives the range: linear footage, how many gates, whether we hit rock during footing excavation, and whether we’re matching discontinued colors. Every quote is a flat written price with line-item scope - no “call for pricing,” no surprises. Under Clause 1 of the Haven Standard, that written number is what you pay unless you sign a change order. Our fence work carries the 365-Day Done Right Promise, and you get the documented photo record standard, same as our $40,000 kitchen jobs.

DIY or Call Us?

There’s safe checking and then there’s the part where people get hurt. You can verify your post cap code, measure leaning posts with a level, and photograph cracks for our review - all useful, all safe. What we don’t recommend is digging out a concrete-footed post yourself (spinal strain, buried utilities) or trying to tension a sagging gate without knowing the hinge-post footing is sound. We’ve replaced three DIY attempts this year in West Palm Beach where the owner cracked the rail trying to force the wrong profile.

Measure twice, document everything, then get out of the way and let the work speak. Call (561) 475-3903 and we’ll schedule a free estimate with the exact part numbers and a written price before anyone picks up a shovel.

FAQs