Jerith Driveway & Pavers Nationwide

Jerith Driveway & Pavers: The West Palm Beach Owner’s Guide

We stock and install Jerith-compatible driveway and paver components in West Palm Beach, with most replacement parts available same-day and installed pricing running $250-$700 for sealing repairs up to $5,000-$14,000 for full driveway replacement depending on substrate condition. Most Jerith owners in West Palm Beach first notice trouble when pavers shift after heavy rain, joints wash out along Flagler Drive properties, or the original sand bed migrates through the drainage layer - symptoms that worsen quickly in our sandy, high-water-table soil. The part you need depends on whether you’re addressing a failed edge restraint, a compromised bedding layer, or degraded joint sand, and getting the spec right matters because Jerith’s interlock geometry varies by series.

Call (561) 475-3903

Which Jerith Models This Applies To

Jerith manufactures aluminum fence and railing systems, not pavers - but many West Palm Beach properties pair Jerith perimeter fencing with paver driveways from Belgard, Techo-Bloc, or similar interlocking concrete systems. When we say “Jerith driveway & pavers,” we’re describing the common West Palm Beach installation pattern: Jerith aluminum fencing or gates integrated with paver hardscaping, where fence post footings, drainage channels, and edge restraints share the same substrate and fail together. To identify your paver series, check the underside for a manufacturer’s stamp - Belgard marks their Dublin and Catalina lines, Techo-Bloc stamps their Blu and Villagio series - and measure the joint width, which determines whether you need traditional joint sand (1/16″ to 1/8″ gaps) or polymeric sand (wider joints, more common in post-2015 West Palm Beach installs). For Jerith fence components, the model number is etched on the inside of the bottom rail. OEM Jerith parts come anodized to match existing sections; aftermarket equivalents from SpecRail or Gilpin match dimensionally but rarely match the original mill finish after three years of Florida sun exposure. We stock both and will show you the difference before ordering.

Signs Your Jerith Driveway & Pavers Is Failing

• Pavers rock underfoot or settle in low spots. The bedding layer of coarse concrete sand has washed out or compacted unevenly, often where Jerith fence posts were cored through the base and backfilled with native soil instead of compacted aggregate. In West Palm Beach, our seasonal water table fluctuation accelerates this - we’ve seen new settling within 18 months on properties east of I-95 where the sand layer was only 3/4″ thick instead of the spec 1″ to 1-1/2″.
• Joint sand disappears after rain, leaving gaps between pavers. Either the original sand was not polymeric (which binds when wetted) or the sealant coat has degraded. Unsealed joint sand in West Palm Beach’s afternoon downpours lasts one to two rainy seasons before washing into the drainage layer below.
• Weeds or ant mounds colonize the joints. This means the joint sand is gone and organic debris has filled the void, creating a growing medium. The underlying cause is almost always failed edge restraint - the plastic or aluminum border that locks the field in place has pulled away from the bedding layer.
• Jerith fence posts lean or gate latches misalign. The concrete footing has settled independently of the paver field because the two were not tied structurally. We see this where fence installers poured footings before paver base prep, leaving a cold joint that shears under load.
• Standing water remains 30 minutes after rain. The permeable base is clogged with sediment, or the original pitch (minimum 1/8″ per foot) was lost during settlement. On West Palm Beach properties with Jerith gates, this often pools at the hinge side where the gate threshold interrupts the slope.

Before

After

Replacement Cost & What’s Included

Here’s what Jerith-integrated paver work costs in West Palm Beach, with parts and labor separated:

• Driveway sealing (maintenance): $250-$700 - includes pressure washing, joint sand replenishment, and two coats of breathable acrylic sealer
• Edge restraint replacement (per linear foot): $12-$22 - aluminum or heavy-duty plastic with spiral steel spikes
• Joint sand removal and polymeric replacement: $1.50-$2.50 per square foot - includes cleaning, re-sanding, and activation
• Localized paver lift and re-base (settled area): $450-$1,200 - remove pavers, add and compact #57 stone and bedding sand, replace pavers
• Full driveway replacement: $5,000-$14,000 - remove existing, regrade, install geotextile and 6″ aggregate base, bedding layer, pavers, joint sand, seal
• Jerith fence post re-footing (per post): $280-$450 - remove post, excavate to 30″ depth, pour 12″ diameter concrete footing tied to paver base where possible

The range depends on three factors: how much of the base is salvageable (we probe with a steel rod before quoting), whether the original install used a proper geotextile separator (many West Palm Beach contractors skip this to cut cost), and access for our compaction equipment. Under Clause 1 of the Haven Standard, the written price you sign includes all of the above - no change order unless you add scope. Every driveway job carries our 365-Day Done Right Promise, documented with before-and-after photos in the binder we hand you at closeout.

DIY or Call Us?

There’s safe owner maintenance and there’s work that requires our crew. You can sweep in dry polymeric sand yourself if the joints are clean and the edge restraint is sound - follow the bag directions exactly, sweep off all excess before misting, and don’t over-water or you’ll glaze the surface. You can also check Jerith gate latch alignment with a level and tighten the through-bolts with a 7/16″ wrench. What you should not attempt: lifting settled pavers without knowing whether utility lines run beneath (West Palm Beach has dense underground infrastructure along older streets), re-compacting base material without a plate compactor and proper lift thickness, or resetting Jerith fence posts in concrete without bracing - a post that leans during cure is a post you’ll replace twice. The polymeric sand activation step is unforgiving; we’ve been called to fix homeowner jobs where the sand cured on the paver face, leaving a haze that only chemical stripping removes. If you’re unsure whether your base is sound, call (561) 475-3903 and we’ll assess it during a free estimate - no charge to tell you what you can safely handle yourself.

FAQs