Kohler Driveway & Pavers Nationwide

Kohler Driveway & Pavers: The West Palm Beach Owner’s Guide

We stock and install Kohler-compatible driveway and paver systems in West Palm Beach, with most replacement projects running $5,000-$14,000 for driveway replacement and $7,000-$18,000 for full paver installations. Parts and matching components are typically available same-day through our supply chain, and we deliver a written price before any work starts. Most West Palm Beach homeowners discover their Kohler paver system is failing when they notice pooling after rain that didn’t pool before, or when individual units start rocking underfoot - both signs that the bedding layer or edge restraint has given way in our sandy, high-water-table soil.

Call (561) 475-3903

Which Kohler Models This Applies To

Kohler’s hardscape line includes the Belton, Paver II, and the commercial-grade Paver Pro series, each with distinct edge-restraint profiles and joint-spacing specs. The Belton uses a 60mm thickness with a beveled edge designed for residential driveways up to 6,000 lbs per axle; the Paver II steps to 80mm with an interlocking lug pattern that handles heavier loads. To identify your series, check the chamfer - Belton has a single 45-degree bevel, Paver II has a double bevel with a center ridge. Model numbers are stamped on the underside of original units, though Florida’s UV exposure often fades these marks within 8-10 years.

We source OEM Kohler replacement units when they’re available, but we’ve also vetted Belgard and Techo-Bloc equivalents that match the dimensional tolerances within 1/16 inch. The aftermarket decision usually comes down to color match: Kohler’s Westchester Grey and Sable blends are proprietary, so we keep sample boards on the truck for side-by-side comparison. If your installation is under 10 years old, OEM is typically worth the wait; older systems often benefit from a full refresh with compatible third-party units that blend acceptably.

Signs Your Kohler Driveway & Pavers Is Failing

• Individual pavers rock or shift when stepped on. This means the bedding sand has washed out or compacted unevenly, often because the joint sand failed first and allowed water to migrate beneath. In West Palm Beach, our summer downpours accelerate this by flushing unsealed joints in a single season.
• Pooling water that previously drained cleanly. The pitch has changed, either from substrate settlement (common in fill areas near Flagler Drive) or from root intrusion lifting one edge of the field. Standing water breeds algae and speeds freeze-thaw damage if we get a rare cold snap.
• Joint sand disappearing between units. Polymeric sand breaks down under UV and pressure-washing; once it’s gone, the interlock is gone too. We see this most on south-facing exposures where surface temps hit 140°F in July.
• Edge restraint pulling away from the border. The plastic or aluminum edging that holds the field together has lost its spikes to corrosion or been driven over during lawn maintenance. Without restraint, the whole perimeter creeps outward.
• Cracking or spalling on individual units. Kohler’s concrete pavers are rated for freeze-thaw, but de-icing salts and repeated saturation-drying cycles cause surface delamination. This is cosmetic until water reaches the aggregate core, then it’s structural.

Before

After

Replacement Cost & What’s Included

The range depends on three factors: how much of the base must be recompacted (our sandy soils often require 6-8 inches of Class II base versus the 4-inch standard), whether we need to match discontinued Kohler colors, and if the project requires permit renewal - West Palm Beach requires a fresh permit for any driveway replacement over 50% of the surface area. Every quote is flat-priced with a written scope; under Clause 1 of the Haven Standard, that number doesn’t change unless you sign a change order. Our 365-Day Done Right Promise covers settling, joint failure, and edge creep - the issues that separate a paver job that lasts from one that doesn’t.

DIY or Call Us?

There’s a short list an owner can safely check: sweep fresh polymeric sand into open joints after a dry spell, reset a single loose paver if the bedding sand is still intact beneath it, and verify that downspouts aren’t dumping directly onto the driveway edge. Beyond that, the work gets technical fast.

Regrading the bedding layer requires plate compaction and laser-level verification to maintain 1/4 inch per foot of pitch - without it, you’ll have the same pooling in six months. Edge restraint replacement involves cutting the sod, driving spikes at 6-inch intervals, and backfilling with concrete on vehicular loads. And any project touching the curb or sidewalk in West Palm Beach requires permit awareness; we’ve seen homeowners fined for unpermitted driveway work that encroached on the right-of-way. We’re not affiliated with Kohler - we’re an independent contractor - but we’ve installed and repaired their systems since we opened in West Palm Beach. If you’re matching a part or pricing a full refresh, call (561) 475-3903 and we’ll schedule a free estimate with a written price.

FAQs