Moen Windows & Doors Nationwide

Moen Windows & Doors: The West Palm Beach Owner’s Guide

We stock and install Moen-compatible windows and doors across West Palm Beach, with most replacements quoted in the $4,500-$15,000 range depending on opening count, frame condition, and whether you’re moving to impact-rated glass. Most homeowners who call us notice the problem first as a draft they can’t trace, a window that won’t stay open, or a door that sticks every summer when the humidity climbs past 80%. In West Palm Beach, that humidity is the tell - it warps frames, corrodes hardware, and degrades weatherstripping faster than inland Florida markets.

Call (561) 475-3903

Which Moen Models This Applies To

Moen’s windows and doors division operated through several series between the mid-1990s and roughly 2015, when the brand shifted focus back to plumbing fixtures. If your home was built or renovated in West Palm Beach during that window, you’re likely dealing with the Moen 5000 Series vinyl windows, the Moen 7000 Series aluminum-clad line, or the Moen Entry Systems steel and fiberglass door collections. The model number is stamped on the hinge side of doors and in the top track channel of sliding windows - a small embossed plate that fades but rarely disappears entirely.

We match parts by that stamp plus two measurements: the rough opening dimensions and the actual sash or slab size, which differ by 1/2 to 3/4 inch depending on the frame profile. For windows, the critical compatibility gotcha is the balance system - Moen used a proprietary coil balance in the 5000 Series that looks standard but carries a unique hook spacing. Aftermarket balances exist, but we’ve seen three brands fail to seat correctly, which is why we source OEM-spec replacements through our distributor network or fabricate custom solutions when the original part is discontinued.

Signs Your Moen Windows & Doors Is Failing

• Window drops or won’t stay open. The coil balance has lost tension or the pivot bar has cracked at the stress point. In West Palm Beach, salt air accelerates corrosion of the balance housing, so we see this on ocean-facing homes ten years sooner than on properties west of I-95.
• Draft along the sill or jamb even when closed and locked. The compression seal has hardened or the interlock weatherstrip has shrunk. Florida UV degrades EPDM rubber faster than northern climates; a seal that should last fifteen years often fails in eight here.
• Door sticks at the top or bottom seasonally. The frame has racked slightly as the slab absorbed moisture, or the hinge screws have wallowed out in the jamb. This is usually fixable without full replacement if caught before the frame itself twists.
• Visible moisture between double-pane glass. The insulated glass unit (IGU) seal has failed, allowing humid West Palm Beach air inside where it condenses on the interior surfaces. The glass pack needs replacement; cleaning between the panes is not possible.
• Hardware operates roughly or the multipoint lock won’t engage all points. The lock mechanism has worn or the keeps have shifted with frame movement. On Moen Entry Systems doors, the multipoint is integrated with the handle set, so partial replacement often requires the full assembly.

Before

After

Replacement Cost & What’s Included

For Moen window and door replacement in West Palm Beach, our installed pricing runs $4,500-$15,000 for window replacement and $8,000-$25,000 for impact window installation, with entry door replacements typically falling in the $2,500-$6,500 range per opening depending on material and hardware grade. The spread reflects three factors: whether the existing frame is square and sound (a racked frame requires reframing), the glass specification (standard versus impact-rated per Florida Building Code), and the interior trim repair scope after the old unit comes out.

Every quote we write itemizes parts, labor, and disposal separately. Under Clause 1 of the Haven Standard, that written price is locked before work starts - no change order, no surprise. Our 365-Day Done Right Promise covers the installation and workmanship; manufacturer warranties on the glass and frame pass through directly to you with documentation in the binder we hand over at close.

DIY or Call Us?

There’s a short list of checks any homeowner can make safely: verify the model stamp, measure the rough opening, and inspect visible weatherstripping for cracks or compression set. What we don’t recommend is removing a window sash or door slab yourself. Moen’s balance systems carry residual tension even when the window appears closed, and a released coil can cause serious hand or face injury. Door slabs, especially steel units, run 80 to 120 pounds and require two people with proper support to avoid frame damage or personal strain.

If you’ve done the checks and have numbers, call us at (561) 475-3903. We’ll confirm compatibility, quote the replacement in writing, and schedule installation with a crew that carries the right parts on the truck. Measure twice, document everything, then get out of the way and let the work speak.

FAQs