Techo-Bloc Home Additions & ADU Nationwide

Techo-Bloc Home Additions & ADU: The West Palm Beach Owner’s Guide

Techo-Bloc hardscape materials integrated into home additions and ADUs in West Palm Beach typically run $45,000-$130,000 for the full addition, with paver patios, walkways, and outdoor living surfaces adding $3,500-$11,000 to the scope. We stock and install Techo-Bloc-compatible structural and finish components for these projects, and we can usually assess your existing installation within 24 hours of your call. Most West Palm Beach homeowners discover their Techo-Bloc surface is failing when they notice joint sand washing out after storms, pavers shifting along the Lake Worth Lagoon side of properties where salt air accelerates bedding layer degradation, or drainage pooling that wasn’t there two rainy seasons ago.

Call (561) 475-3903

Which Techo-Bloc Models This Applies To

Techo-Bloc produces several product lines commonly found in West Palm Beach home additions and ADU hardscapes: the Blu 80 mm and 60 mm pavers for vehicular and pedestrian surfaces, the Antika and Villagio flagstone-style slabs for pool decks and courtyards, and the Industria smooth-finish pavers favored for modern ADU patios in the Northwood and El Cid neighborhoods. The critical compatibility point is the edge restraint system - Techo-Bloc’s own Pro-Edge aluminum or Surebond rigid PVC restraint must match the paver thickness exactly, or the bedding course will migrate under Florida’s daily saturation-dry cycles.

To identify your Techo-Bloc product, look for the manufacturing date stamp on the paver underside - Techo-Bloc stamps a two-digit year and plant code in the mold - and measure the exact thickness with a caliper, not a tape measure, since 60 mm and 80 mm pavers are often mixed on older West Palm Beach jobs where phases were added years apart. Rowan Construction Group West Palm Beach is an independent service provider, not affiliated with Techo-Bloc. We source OEM Techo-Bloc replacement units through authorized Florida distributors and also specify quality aftermarket equivalents from Belgard when the project budget or lead time demands it. The aftermarket decision usually comes down to color matching: Techo-Bloc’s Champlain Grey and Onyx Black hold their integral color longer than most competitors in UV exposure, so we default to OEM when we’re tying into existing visible surfaces.

Signs Your Techo-Bloc Home Additions & ADU Is Failing

• Joint sand flushing out after rain. The polymeric sand bedding between pavers has broken down, usually from premature sealing that trapped moisture or from using plain mason’s sand instead of stabilizing joint sand in the original install. In West Palm Beach, this accelerates once the sand loss exceeds 1/4 inch depth.
• Pavers rocking underfoot or visibly tilting. The bedding course - typically ASTM C33 concrete sand in Techo-Bloc specs - has washed out or compacted unevenly, often where downspouts discharge directly onto the surface or where the original base was insufficient for our sandy native soil.
• White efflorescence blooming across the surface. Calcium hydroxide from the concrete substrate is migrating through the paver body, a cosmetic issue that can indicate excessive moisture trapped beneath due to failed edge restraint or inadequate slope.
• Edge pavers migrating outward or sinking along borders. The edge restraint has corroded (aluminum) or cracked (PVC), which in West Palm Beach usually happens first on the south and west exposures where thermal cycling is most extreme.
• Standing water 30 minutes after rain stops. The original 1% minimum slope was lost to settlement, or the bedding course has created low spots - common in El Cid and Flamingo Park additions built on filled lots where organic material continues to decompose beneath the base.

Before

After

Replacement Cost & What’s Included

The range depends on three factors: whether we’re tying into existing Techo-Bloc that must be color-matched (OEM sourcing adds 10-15% material cost), whether the base course needs excavation and recompaction with a plate compactor to 98% Proctor density, and whether the project requires permit revision because the original ADU or addition footprint is changing. Under Clause 1 of The Haven Standard, you receive a written price before any work starts - every line item listed, no call-for-a-quote process. The 365-Day Done Right Promise covers the installation, and the documented photo record shows you the base condition before we cover it.

DIY or Call Us?

There’s a clear line between what a West Palm Beach homeowner can safely assess and what requires the equipment and sequencing we bring.

You can check: whether the paver is actually Techo-Bloc (flip it, look for the stamp), whether the joint sand loss is superficial or deep enough to expose the bedding course, and whether the edge restraint is visibly cracked or separated from the paver line. A garden hose test - flooding the surface and timing drainage - will tell you if the slope has failed.

Where DIY goes wrong: excavating the bedding course without checking for buried utilities (Florida’s shallow water table means electrical and irrigation lines run higher than in other markets), recompacting over uncompacted fill that will settle again in six months, and applying polymeric sand before the surface is bone-dry, which locks moisture in and causes efflorescence to worsen. We also see homeowners install standard PVC edge restraint where aluminum is specified for vehicular loads, or vice versa, which voids the structural warranty on the surface.

Measure twice, document everything, then get out of the way and let the work speak. If you’re seeing multiple symptoms from the list above, the substrate is likely the real problem, not the pavers themselves. Call (561) 475-3903 to schedule your free estimate - we’ll bring the moisture meter, the plate compactor, and the written price.

FAQs